Framing in an Embroidery Hoop

You've just finished your embroidery/cross stitch masterpiece! Congratulations!

What's next?

You'll want to frame it, of course, so you can share it with everyone. Standard frames are always a nice option, but their prices are not always nice. A cheap, easy, and adorable option is to frame your masterpiece in an embroidery hoop.

Items needed to frame in a hoop:

• Embroidery/Cross Stitch Masterpiece
• Hoop that fits your masterpiece
• Felt
• Pencil
• Needle
• Heavy Duty Thread
• Scissors
• Craft Glue

Items needed to frame in an embroidery hoop

First things first, iron your masterpiece! You do NOT want to go to all the work of framing it without ironing out all the wrinkles. Trust me on this.

Step Two: Take the inner hoop and trace around it on the felt. Cut out your felt circle and set it aside for later.

*Side Note* If you want to decorate your hoop, do it now! Paint it, wrap it in ribbon, whatever you want! Just make sure it's dry before putting your masterpiece in it.

Step Three: Put your masterpiece in the hoop. You'll want the screw at the top, so make sure it's centered nicely. Pull the fabric until it's taut and tighten the screw. Repeat until the fabric is as taut as can be and the screw is nice and tight. Good job!

Step Three: Fabric is taut, screw is tightened. Good job!

Step Four: Get out your needle and thread, it's time to sew! You'll want to use a heavy duty thread to help you with this part. If you don't have any heavy duty thread on hand, just double up on whatever you have handy. Cut your thread long enough to go around your hoop twice. Make a big knot in the end of your thread. Using a large running stitch, stitch around the hoop about 3/4" away from the hoop.

Step Four: Large running stitch around the hoop. I realize now that using WHITE thread was not such a good idea. Sorry!

Step Five: Trim your fabric close, but not too close, to your running stitches. Was that vague enough?

Step Five: Trimmed fabric. Job well done! 

Step Six: Take the loose ends of thread and pull them tight. When it's good and tight, tie the ends together. Looking good!

Step Six: Pull threads tight and tie them in a knot.

Step Seven: We're almost done! Remember that felt circle we cut out earlier? Yeah, we're going to need that now. Take your felt circle and glue it to the back of the hoop with your craft glue. Let it dry. Seriously, this part is important!

Step Seven: Glue your awesome felt circle to the hoop with some craft glue.

Step Eight: You've made it, we're done! Enjoy your masterpiece! Give yourself a pat on the back for a job well done.

Step Eight: Enjoy your hard work! 

Piece of cake, right? Now go - craft, create, and frame everything you make!